Hydraulic Dust Caps

[jgold]

I have a Kioti CK 20 hst and the hydraulic rubber dust caps for the loader fell apart. I cannot locate any locally. They should be 3/8" Does anyone know where I could get some metal or aluminum caps? The old female cap showed TFB 38 and BIR 38 on the side. My dealer was no help. Thank You /forums/images/graemlins/confused.gif

 

[jgold]

I have a Kioti CK 20 hst and the hydraulic rubber dust caps for the loader fell apart. I cannot locate any locally. They should be 3/8" Does anyone know where I could get some metal or aluminum caps? The old female cap showed TFB 38 and BIR 38 on the side. My dealer was no help. Thank You /forums/images/graemlins/confused.gif

 

[TBDonnelly]

http://www.surpluscenter.com/sort.asp?UID=2006050408471731&catname=hydraulic&keyword=HFQC

Scroll down the page.

Don

 

[TBDonnelly]

http://www.surpluscenter.com/sort.asp?UID=2006050408471731&catname=hydraulic&keyword=HFQC

Scroll down the page.

Don

 

[TBDonnelly]

You can also go here:

http://www.discounthydraulichose.com/

Download the accessories catalog (pdf file)

Don

 

[TBDonnelly]

You can also go here:

http://www.discounthydraulichose.com/

Download the accessories catalog (pdf file)

Don

 

[Piedmont3]

jGold,
You can go to the hardware store or wal-mart and get rubber chair leg covers that will fit, they are usually .99 or 1.19 for a set of 4. They work very well and tend to flex as they get hot or contract as they get cold. But they are inexpensive and easily found.

 

[Piedmont3]

jGold,
You can go to the hardware store or wal-mart and get rubber chair leg covers that will fit, they are usually .99 or 1.19 for a set of 4. They work very well and tend to flex as they get hot or contract as they get cold. But they are inexpensive and easily found.

 

[Highbeam]

Mine rotted off right away too. No sweat though since I don't take the loader off. I wonder if you're making matters worse by putting the caps on and off vs. just cleaning off the QC before reattaching. The male part that stays on the tractor is easy to clean and the loader is setting somewhere clean with the female QCs pointing at the ground.

 

[Highbeam]

Mine rotted off right away too. No sweat though since I don't take the loader off. I wonder if you're making matters worse by putting the caps on and off vs. just cleaning off the QC before reattaching. The male part that stays on the tractor is easy to clean and the loader is setting somewhere clean with the female QCs pointing at the ground.