Hello,
I have recently purchased a 2003 6465 with a perkins engine (3600 hours) and a Dyna4 transmission. The tractor is fantastic, but has recently thrown up a couple of problems. They may be related, or maybe not.
1) the 3 point linkage controls have stopped working.
2) It has stopped shifting into the low range box (the one accessed by pushing that little green button on the gear lever). I hardly ever use this, so may have been cactus for a while.
3) today when I started it, the transmission filter light stayed on. I then drove it to the workshop, stopped and restarted it, and the light went out as normal. I then drove off, but am unable to change ranges on the LH reverser lever. It is stuck in D. It makes no difference whether it is in forward or reverse.
According to my research, it could be a hydraulic issue, or maybe microswitches in the reversing lever.
Does anybody here have an suggestions?
thank you all,
Rob
I have recently purchased a 2003 6465 with a perkins engine (3600 hours) and a Dyna4 transmission. The tractor is fantastic, but has recently thrown up a couple of problems. They may be related, or maybe not.
1) the 3 point linkage controls have stopped working.
2) It has stopped shifting into the low range box (the one accessed by pushing that little green button on the gear lever). I hardly ever use this, so may have been cactus for a while.
3) today when I started it, the transmission filter light stayed on. I then drove it to the workshop, stopped and restarted it, and the light went out as normal. I then drove off, but am unable to change ranges on the LH reverser lever. It is stuck in D. It makes no difference whether it is in forward or reverse.
According to my research, it could be a hydraulic issue, or maybe microswitches in the reversing lever.
Does anybody here have an suggestions?
thank you all,
Rob
