john m
New member
well here it is, i have almost finished my loader project, but i need to run the lines. i have a haldex 4-8 GPM pump 1200 PSI and running 2 inch bore cylinders. the pump has 7/8 ORB fittings and i need to run up to my 2 spool cesna valve off of a JD 318 those are 37- JIC fittings. i would like to use the reusable fittings from discount hyd. hose, so i can make my own hoses for everything, but was wondering how well those work. i read a few other sites and people like them. i tried to call DHH but being sunday they were closed. i still need to weld up a fluid tank and weld fittings on that. but wanted to wait until i knew what i could do for the plumbing. i wanted to run 3/8 NPT lines to the cylinders with 37 jic fittings at the valve as they are already there. and 3/4 lines for the pump. thanks John
