hydraulics for a yanmar 1610 tractor

   / hydraulics for a yanmar 1610 tractor #1  

1TomV

New member
Joined
Mar 16, 2005
Messages
3
I would like to extend the hydraulics from the tractor system to a front loader , is it possible to come out of the pressure valve under the seat or not . Any help would be appreciated thank you!
 
   / hydraulics for a yanmar 1610 tractor #2  
The recommended method is to cut the hi pressure line just after it exits the pump, attach a compression fitting for your hose, connect your hose to your FEL valve, run a line back to the hi pressure line, then connect just after the cut with a second compression fitting. This is a very simple and proven successful. When I first connected my FEL I connected to the draft control valve. It was too slow because it was restrictive.
 

Tractor & Equipment Auctions

7046 (A50322)
7046 (A50322)
2021 Caterpillar 304E2 Mini Excavator (A50322)
2021 Caterpillar...
2018 Toro Grounds Master 7200 72in Zero Turn Commercial Mower (A50324)
2018 Toro Grounds...
2014 INTERNATIONAL MA025 26FT NON CDL BOX TRUCK (A51222)
2014 INTERNATIONAL...
2015 International DuraStar 4300 Street Sweeper Truck (A50323)
2015 International...
2015 CHEVROLET CAPRICE POLICE CAR (A51222)
2015 CHEVROLET...
 
Top