Hydraulics hook up on YM1700

[Eddie]

What size compression fittings are these???? A 1/2 seems too big for the pressure line on my 1700.

 

[Inspector507]

They are metric lines......don't remember what size. Maybe 7-8mm??

 

[Eddie]

Where in the world can I get metric compression fittings?????

 

[Inspector507]

Quite a few of the Yanmar dealers that frequent here on TBN may be able to help out. I know the local Parker dealer told me that he has in stock or can get most metric fittings.

 

[Jagmandave]

My local hydraulic repair place carries metric fittings........

 

[EFC]

I have them and your hoses and disconnects if you like.

Buck

 

[Eddie]

I was able to get the fittings from Fredricks which is close to me and got it installed. It has a valve that requires a 3 hose hook up. One going to pressure line from pump, another that goes to the pressure line on back to rear lift and one line that goes to the low pressure return line. When the cylinders bottom out it bypasses back to the return line. It works great now!!!!!! /forums/images/graemlins/laugh.gif /forums/images/graemlins/laugh.gif /forums/images/graemlins/laugh.gif /forums/images/graemlins/laugh.gif /forums/images/graemlins/laugh.gif