May 8, 2010 / Hydro pressure #1 Rob-D Elite Member Joined Oct 20, 2006 Messages 2,517 Location Catskills Tractor John Deere 3320 Hi Gang, Does anyone know of an easy way to check my pump pressure? I'm wondering if mine is low on one of my tractors. The specs show it as 2412but my hunch is it might not be that high. Rob
Hi Gang, Does anyone know of an easy way to check my pump pressure? I'm wondering if mine is low on one of my tractors. The specs show it as 2412but my hunch is it might not be that high. Rob
May 8, 2010 / Hydro pressure #2 kennyd Advertiser Joined Jul 6, 2003 Messages 13,816 Location Westminster, MD Tractor John Deere 3720 CAB/TLB, JD455 You need a gauge, a short piece of hose and a QD nipple. Plug it in and activate the lever to energize that port to read the relief pressure. Here is a picture of mine. Attachments DSC04084.JPG 344.4 KB · Views: 420
You need a gauge, a short piece of hose and a QD nipple. Plug it in and activate the lever to energize that port to read the relief pressure. Here is a picture of mine.
May 8, 2010 / Hydro pressure Thread Starter #3 OP Rob-D Elite Member Joined Oct 20, 2006 Messages 2,517 Location Catskills Tractor John Deere 3320 I knew if anyone came up with a method to test these things it would be you Kenny! Thanks I'll try it, Rob
I knew if anyone came up with a method to test these things it would be you Kenny! Thanks I'll try it, Rob
May 8, 2010 / Hydro pressure #4 kennyd Advertiser Joined Jul 6, 2003 Messages 13,816 Location Westminster, MD Tractor John Deere 3720 CAB/TLB, JD455 No problem... I can get more specific when you acquire the parts and are ready to test.:thumbsup:
