Hydro pump GPM?

[DetroitMike]

Does anyone know the output rating of the hydro pump on a 1500D in gallons per minute and psi? And, when installing a loader like a Koyker 110, will this pump do the job when plumbed correctly?

Thanks

 

[gbirky]

I don't know what the pump capacity is, but I can tell you that everyone uses the tractor hydraulics for loaders on the YM1500D. If you look at the pump, it should have a tag with the flow and pressure on it. The flow is normally specified in cc, and the the pressure in bar.

 

[jimstractors]

My book shows @ 2400 rpm the flow rate should be about 5GPM @ 1500 psi. Pressure can go as high as 2200psi.

 

[Soundguy]

I'm impressed.... Our old 8n's olny get 2.9 gpm, with the slightly newer ( and bigger NAA pumps getting 4.8 gpm...

Not bad at all..

Soundguy

 

[DetroitMike]

Jim,

Thanks for the info!

 

[rbeitz]

I have a 1500D with a Koyker 110 and it works great. It's amazes me what I can do with this little tractor and loader. Don't know how I ever got along without it!