hizoot
Gold Member
When my hoe makes a noise....I put a pillow over it. I pay good money and expect a hoe to be well lubed. 
I hear an odd noise using my hoe
- Thread starter lzicc
- Start date
- Views: 6146
tawilson
Platinum Member
After 10 hours use on my NH hoe I was surprised at how many bolts needed tightening.
grsthegreat
Super Star Member
SPYDERLK
Super Star Member
- Joined
- Feb 28, 2006
- Messages
- 10,393
- Location
- VA
- Tractor
- JD2010, Kubota3450,2550, Mahindra 7520 w FEL w Skid Steer QC w/Tilt Tatch, & BH, BX1500
Well, after 0 hrs all the bolts fastening attachments to the tractor needed tightening. [
] After 820 hrs of hard use they have not re loosened.larry
Shmudda
Gold Member
When my hoe makes a noise....I put a pillow over it. I pay good money and expect a hoe to be well lubed.
My hoe makes a lot of noise sometimes too......some yelps, screams and heavy breathing......
Darn this went into the gutter quick! Gotta have a sense of humor though!
Craig
My Hoe
Platinum Member
- Joined
- Oct 31, 2010
- Messages
- 560
- Location
- NYS--Various Parts
- Tractor
- Kubota B3000HSDCC, BH77, 5' Belly Mower, 6' Hyd. Angle Plow
nspec
Platinum Member
- Joined
- Dec 31, 2007
- Messages
- 628
- Location
- Southern Rhode Island
- Tractor
- Kubota B2630, '53 Farmall Super H, '47 Farmall AI, '44 Farmall A
being so new, maybe a little air that's being worked out of the lines?
OP
lzicc
Platinum Member
Thanks for all of the input. You guys are crazy. I have to watch how I word my headings. I guess I asked for it though.
I am going to grease all the joints again. It doesn't sound like it is coming from a joint though, it sounds like it is inside the boom. I used the BH allot over the weekend and the noise is still there. What is weird is that the noise just start after using the hoe for awhile, it didn't make any noise at first.
The sub frame thought is also a good thought. I remember when I purchased the machine, the sales person did tell me to check those bolts after using the machine for awhile.
I'll let you know what I come up with.
I guess I asked for it though. I am going to grease all the joints again. It doesn't sound like it is coming from a joint though, it sounds like it is inside the boom. I used the BH allot over the weekend and the noise is still there. What is weird is that the noise just start after using the hoe for awhile, it didn't make any noise at first.
The sub frame thought is also a good thought. I remember when I purchased the machine, the sales person did tell me to check those bolts after using the machine for awhile.
I'll let you know what I come up with.
OP
lzicc
Platinum Member
I got home from work yesterday with all intentions of finding the squeaking noise to find out the noise was gone. I did however go over the sub frame mount bolts to make sure they were tight and they were. It almost had to be lack of grease somewhere that didn't quite reach an area of a pin or something and now it finally reached it. I have no other idea what it could have been. Just hope it doesn't come back.