I need advice on Hydraulics

wallace · May 30, 2007

Okay I am back but with not much time, sorry I have not been around here much lately but I have been swamped with new tractor sales.

I have a lot of catch up to do...

Hmmm.. lets see if I were to do the cutter I would be putting on the aux remote kit and make my lines run up to the front of thr loader and put a set of quick couplers up on the cross tube.

You can't really use a diverter valve because you need the constant flow and a diverter valve is operated by a push button or triger.

ajflyfishing · May 30, 2007

Thanks for your help I will try to call and order what I need. You all have been a huge help.

IslandTractor · May 30, 2007

Here are some photos of my "temporary" set up. It works fine and I have done a ton of work with these lines just ziptied into place. What I intend(ed) to do was to put the protective sheathing on the lines and also to fabricate and attach (weld) some brackets to attach the couplers on the torque (cross) tube and also on the FEL post. Note that I have an extra set of couplers on the FEL post which I do not recommend as it is just not necessary unless you are removing your FEL all the time (I've never had to remove mine yet).

Photos might be useful to orient you. Don't be a slob like me and just zip tie the whole thing together (but do use zip ties to keep the hoses out of harms way). Put some brackets on and use the armour sheathing too.

ajflyfishing · May 31, 2007

Talk to Rick today. He is going to supply what I need for this project. Thanks Rick if you read this, look forward to talking with you soon. Thanks guys I will let you know what happens. Can someone send me a picture of the old and new FEL, (the one that is cracking and the one that isn't).