I Want to build a Mower/brush chopper

   / I Want to build a Mower/brush chopper #1  

MrJimi

Elite Member, Rest in Peace
Joined
Jan 29, 2006
Messages
2,530
Location
NorthEast, Florida
Tractor
Case 1845 C Skid steer
Hello This is my first post and I would like to say hello to all of you.
I want to build a hydraulics mower/brush cutter that will run from auxiliary hydraulics between 10 and 20 GPM,I have been looking in all the wrong places and after reading lots of postings here, I think I will find my answer.
Almost forgot, This will be for a Bobcat/skidsteer
Thanks for your time
Jim /forums/images/graemlins/smile.gif
 
   / I Want to build a Mower/brush chopper #2  
What's the question???

You'll find many experts,general tinkerers and just good ole boys here.
Machine Builders Network
 
   / I Want to build a Mower/brush chopper #5  
That seems pretty weak. Only 3/4" brush capacity? I could swear I've seen forestry mowers like that capable of grinding trees and stumps even below grade. I would look for a much more capable model or just find a hydraulic rotary cutter. Your typical brush hog will tear up anything smaller than your forearm without excessive strain.
 
   / I Want to build a Mower/brush chopper #6  
I agree but I'm not sure what's rated for that Bobcat pump and so on. I was just thinking somehting along that line.

I've seen huge flail mowers on a Cat or JD front loader. IE the ones that bend in the middle, 4wd, and 5' tires.

Ok here is another...

One

Looks Fun
This one is mean looking
 
   / I Want to build a Mower/brush chopper #7  
Now we're talking. Kind of like a tiller geared up.

The skid steers usually have very high hydraulic flow rates since all 70-120 HP is running a hydro pump and not a transmission. Before I bought my tractor and hog, I thought about buying or renting a forestry mower. They are only needed for initial clearing though and the tractor was more long term.
 
   / I Want to build a Mower/brush chopper
  • Thread Starter
#8  
WoW!! those are some serious units, I watched the videos and that is real nice but way out of my range.
I want to make something like a brushmonster except less money and stronger. Can be seen at
www.brushmonster.com
Jim
 

Tractor & Equipment Auctions

2025 AllMetal K2119 UNUSED Double Garage Metal She (A47484)
2025 AllMetal...
2025 AllMetal K0720 UNUSED 20 ft. Bi-Parting Metal (A47484)
2025 AllMetal...
2016 Ford Explorer AWD SUV (A44572)
2016 Ford Explorer...
2018 Kubota BX2680 Sub-Compact Tractor  4WD, 218 Hours (A46878)
2018 Kubota BX2680...
2020 John Deere 870GP Motor Grader (A45336)
2020 John Deere...
2023 KAUFMAN FE-3 8K-47 TRI AXLE CAR HAULER TRAILER (A43005)
2023 KAUFMAN FE-3...
 
Top