iMatch Bushings - online source
- Thread starter TOL1488
- Start date
- Views: 12372
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,587
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Yep, I'd go with the $3 bushing too.
Wesdor
Gold Member
I went to the local Farm and Fleet and picked up a pair of bushings for less than $3.
I asked the salesman who sold me my iMatch if I should purchase an extra set and he said something like, check the price before you do that. My point being, even a Deere dealer wasn't pushing them (and that was good advice)
I asked the salesman who sold me my iMatch if I should purchase an extra set and he said something like, check the price before you do that. My point being, even a Deere dealer wasn't pushing them (and that was good advice)
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,587
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
The bushings sold for the iMatch-type conversion have a step, and roll pins to hold them on. See attached. Doubt you found those for $3. These are from SpeeCo for around $15. From Deere, they are in a kit that also includes the top link bushing. To fit right, buy the Cat I-III, not the Cat II-III 'bushing'.
Attachments
Iowa2210
Bronze Member
If these are the bushings you guys are talking about, they are $21.95 a pair with the roll pins at most TSC stores. They look exactly the same as the pair that came with the I-match from Deere.
Iowa2210
Iowa2210
BloomingtonMike
Platinum Member
- Joined
- Jun 30, 2004
- Messages
- 788
- Tractor
- John Deere 3320
The bushings from Farm and Fleet that I bought were Cat2-3 and I still had to buy a cat1-2 sleeve. Price was $17.95.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,587
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
FF was where I bought mine, and I had to wait for them to finally get the right ones (Cat 1-3) in before I'd buy them. They were from SpeeCo, part # HF141144 and cost me $12.99 at the time.
The bushings zip tied to my Imatch when it arrived were nothing more than 1 1/4" long x 1 7/16 OD x 7/8 ID hardened steel bushings. I wonder why they changed the bushings?
For something with a machined shoulder and drilled holes I can understand a bit of a price increase. I'll likely find someplace online to purchase the SpeeCo kit.
For something with a machined shoulder and drilled holes I can understand a bit of a price increase. I'll likely find someplace online to purchase the SpeeCo kit.
jeepinator
Gold Member
- Joined
- Nov 7, 2005
- Messages
- 263
- Tractor
- JD 3520, JD X739
Does anyone have either the JD or the Speeco part number for the part that Beenthare posted an image of?
I don't want to mess around with bushings (metal tube adapters) and their narrow size and the clip that keep this bushing from falling off.
I don't want to mess around with bushings (metal tube adapters) and their narrow size and the clip that keep this bushing from falling off.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,587
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I (beenthere) posted the SpeeCo number for the image. /forums/images/graemlins/wink.gif
SpeeCo, part # HF141144
SpeeCo, part # HF141144
