Backhoe in need of subframe mount

[sullivan7sracnn]

Hello Everyone, I recently purchased a John Deere 4400 with a 430 loader. It also came with a bush hog 762h backhoe. I am looking for a subframe mount kit or thescematics on one to build my own, I was told by the dealer it is no longer available new, so I need to find a used one or build one, any help will be appreciated thanks!

 

[Sysop]

If you know what subframe mount you need, these guys list several (see the drop down box above the diagram), not sure if they have it. Worth investigating. Worst case scenario, get a 3 point mount for it. 3 point isn't as strong as a subframe, but you're not as limited on what tractors it works on.

Good luck!

https://store.germanbliss.com/bush-hog-762h-backhoe-subframe-adapter-kit-50034942-parts

 

[Baby Grand]

Hello Everyone, I recently purchased a John Deere 4400 with a 430 loader. It also came with a bush hog 762h backhoe. I am looking for a subframe mount kit or thescematics on one to build my own, I was told by the dealer it is no longer available new, so I need to find a used one or build one, any help will be appreciated thanks!

If you can' find what you need, here's dfkrug's guide to making your own:
http://www.tractorbynet.com/forums/build-yourself/171760-how-build-your-own-custom.html

 

[sullivan7sracnn]

Thanks for the info ,I will check them out.

 

[sullivan7sracnn]

thanks for the info!

 

[sullivan7sracnn]

So far no luck, bush hog no longer makes the subframe kit for my tractor, actually they didn't make it anyway, I traced it back to Ameriquip, but they no longer make it either and they could not release any schematics on it, bush hog no longer has them make their products, so I am back to square one. Looks like i'm going to have to hand fabricate one, if any one has any ideas they would be appreciated, I have been checking with tractor salvage yards but no luck so far....