Info button

   / Info button #1  

Dallas_Lilly

Gold Member
Joined
Feb 18, 2006
Messages
339
Location
Flagstaff AZ
Tractor
Montana 4340C
Just bought a brand new T474 cabbed tractor. Anyone figure out how to change the Celsius to Fahrenheit?
 
   / Info button #2  
Here is the procedure I found from the TYM Tractors Owners Facebook group:

"
Here's a simple way on 474 I published Aug 23. Not sure if it works on 574 but what do you have to lose?
"Change dash temperature reading.
You can easily change the displayed engine temperature from Celius to Farenheit, or vice versa. This very simple procedure can be done while tractor is running, or just turn ignition on. My tractor is a 474 hydro for reference, new with just 40 hours.
Change temp from C to F or the opposite.
1-Turn ignition on, wait a few seconds.
2-Depress then release Info button so dash reveals voltage & temperature.
3-Turn headlights on bright.
4-Depress & continue holding Info button approximately 15 seconds or until temp changes from Celius to Farenheit or vice versa.
5-Done." "

Hopefully it helps.
 

Tractor & Equipment Auctions

2012 FORD F-650 SUPER DUTY BOX TRUCK (A51243)
2012 FORD F-650...
PORTER CABLE 150 PSI AIR COMPRESSOR (A50854)
PORTER CABLE 150...
Pallet Fees (A50775)
Pallet Fees (A50775)
2011 Ford F-250 4x4 Pickup Truck (A50323)
2011 Ford F-250...
2007 JOHN DEERE 624J WHEEL LOADER (A51406)
2007 JOHN DEERE...
CATALOG IS A GUIDE ONLY!! (A50774)
CATALOG IS A GUIDE...
 
Top