Info needed on loader attachment for 1500 - 2100

[johneic]

Going to look at a loader he says he took off of a TU 2100, its different than most loaders he says (No pics), 1.5 hours away, he says it fits on the front bracket for the weights, does not have arms, only lifts about 3-4 feet, He thinks it is made by Iseki, this would suit my purposes.

Does anybody know anything more about this type of loader?

John

 

[lens12]

New one on me. Sounds possible.

 

[johneic]

I just got home with it, too dark for pics, Will take some tomorrow

 

[Sideways]

Sounds interesting

 

[Leejohn]

I think it might be a johnson loader before seeing any picture yet

 

[johneic]

Its a real strange critter, I have "posed" in about the position it would fit on a tractor, data plate says Sanyo in lower left, I think it reads LMD TU 700 or TU1700, it could be LMD IU 1700 and what I guess is serial #3003.

 

[Kernopelli]

I had started a thread asking about these loaders several years ago http://www.tractorbynet.com/forums/grey-market-tractors/128886-unique-gray-market-fels.html

John, I see you are in Paducah ( and IL plates on the car in the pic). We have to be pretty close to each other. Where did you find the loader? Can I ask what you had to pay?

 

[NHmitch]

Hi,
I have always thought that these loaders were very cool. I have only seen them in videos in Europe before, and I found a video of one for you on a TA230F. I have seen one on a TX1500, however I cannot find the video. Attached is the TA230F video. The loader looks well built. The only issue that i wonder about is the weight distribution. Will more of the weight be on the front end, rather than mid-tractor? Anyways, nice loader! What are you going to mount it on? I am going to try and and buy a loader at the end of the month for my TX1300F, and I have found two so far that will work. One is a Koyker 80, and the other is made by a company in Oregon that sells Grey Market Tractors. Hopefully I can find one that works out well without too many modifications. I want to try to run the hydraulics from my PTO hydraulic pump. Anyways, nice loader, and keep us updated!

You may want to turn your volume down!

 

[johneic]

Hi Darryl and Mitch:
I am we are closer than you think Darryl, I am actually in Buncombe, Paducah is more well known so I use that, It would be nice to get together sometime, I go to Marion sometimes, I love 17th Street BBQ, I paid $1,000. Sorry I got everyone here involved, it is not a "bolt up" to my TX1500 which I did not know when I went to look at it, seller told me it attaches to the front so I did not bring pictures of my rear/engine attachment points, so I bought it because I thought the price was right and I would take a chance. I have decided it is beyond my fabrication ability so I have put it up for sale on Craigslist and eBay(I am not trying to sell it here, I think that would violate a rule, sorry if I am, just updating as Mitch asked...).

 

[Kernopelli]

I just looked at your CL ad. We are indeed closer than I thought. In fact, I work in Vienna at Vienna Correctional Center. LOVE those 17th Street BBQ nachos!!!!!! Wouldn't be interested in a trade on the loader would you? If so, send me a PM here on TBN.