Info request MF-25

[Amateur]

Hi all,

I am locking to buy a Disk Harrow and I found a MF-25 close to my place but I dont know If it work on My KUBOTA B2620?

What is the weight of a MF-25.

Is it to big for my tractor?

Thanks ...

 

[sweettractors]

Depends on the width of the disc? Ken Sweet

 

[Amateur]

The men says 15 inches.

 

[sweettractors]

15 inches wide is impossible? Ken Sweet

 

[Amateur]

Thanks Ken for the answer , but since you seam to know the MF-25 can you help me with the possible size of the disk and the average weight of a MF-25.

Thanks again.

 

[Farmwithjunk]

They were built in 6-1/2', 8', and 9' models. Easy way to spot widths is to count blades....6-1/2'er has 5 blades per gang, 8' has 6 blades, and 9' has 7 blades per gang (X4)

I cannot find ANYTHING in my collection of MF literature where weights are listed.

The #25 MF disc performs as if it were MUCH heavier than it actually is. IMHO, the best mounted disc ever built!

 

[sweettractors]

They were built in 6-1/2', 8', and 9' models. Easy way to spot widths is to count blades....6-1/2'er has 6 blades per gang, 8' has 7 blades, and 9' has 8 blades per gang (X4)

I cannot find ANYTHING in my collection of MF literature where weights are listed.

The #25 MF disc performs as if it were MUCH heavier than it actually is. IMHO, the best mounted disc ever built!

:thumbsup: Ken Sweet

 

[Farmwithjunk]

:thumbsup: Ken Sweet

Gotta give me one thumb down this time Ken. Notice I went back and edited my post....I had one too many blades per each width.... 6-1/2' is FIVE blades per gang, 8' is SIX blades each, and 9' is SEVEN blades per gang.