Installing Power Beyond on a 4310

[Tractors4u]

The kit was $215 plus $15 shipping.

 

[Tractors4u]

</font><font color="blue" class="small">( The return line should be at least 1-1/2 times the inner diameter of the high pressure hydraulic lines to allow for fluid expansion and adequate flow at all times. )</font>

That makes sense. The only thing is I believe that the original return line was a smaller ID than the supply line. The photo in the book sure made it appear that way.

 

[rockyridgefarm]

Thanks for the excellant description DarylnDaryl! There was just another thread dicussing the sizes where the return was 3/4" which I thought HAD to be a mistake, but thats what mine is! Makes a lotta sense!

 

[Tractors4u]

Another picture. Here is the other end of the linkage that I removed.

 

[Tractors4u]

Back side of the Power Beyond before the return line was installed.

 

[Tractors4u]

I had never noticed this plug before. You remove it to install the return line.

 

[Tractors4u]

This is the 90deg elbow that goes in to the return.

 

[rockyridgefarm]

Back side of the Power Beyond before the return line was installed...

Um, pepper, that's the FRONT...

/forums/images/graemlins/tongue.gif

Good job on the install, save the flex line your dealer so nicely provided, yours looks like my dealer installed setup...

 

[Tractors4u]

Did they put a flex line on yours too?

 

[rockyridgefarm]

Purely rigid! Shows what a good dealer you have to find a solution that is not gonna come back to haunt you.

BTW, oh never mind, I was gonna ask about the backhoes fit, you don't have IT yet, do you.....

What are you using that nice looking 3rd scv for..?