International 2 point hitch impliments

[ernemats]

Has anyone converted an old international 2 point quick hitch attachment to a 3 point hitch?

 

[ronjhall]

ernemats
I had a 3PH conversion kit on my Farmall 340. Bought it from TSC many years ago. I modified the ends to raise the arm height about 4".
I do not have any pictures of the hitch but one of the modification I made was similar to a Pat's Easy Change hitch. This allowed me to keep the arms on the tractor and use it similar to a normal 3PH.

 

[sweettractors]

What IH/Farmall tractor do you have?--Ken Sweet

 

[ernemats]

Ken:
I do not have an international/farmall tractor. Maybe my question was not clear. I have an Agco-Allis 5660 tractor and I found a international 2 point disc that I was wondering how hard it would be to convert it to a 3 point hitch disc. I don't think it would be that hard to do but I was just trying to find out if anyone had done a 2 point to 3 point impliment conversion.

 

[ronjhall]

Ernest

I misread your post. /forums/images/graemlins/blush.gif

Here is a thread with 3PH measurements.

Click Here

 

[sweettractors]

I think it would be pretty easy to put the A-Frame on the disc, especially if you have welding skills. You could just use steel on hand or purchase a New 3 point A-Frame from a HD Box Blade or similar and weld it on. I have seen this done a few times and it actually works fine.--Ken Sweet
Sweet Farm Equipment LLC *Over 20 Refurbished Sickle Bar Mowers in Stock Today*