Is she too big??

[lucky llama]

I would go for it. I have a 7040 and pull a ten foot cut simi mount bush hog. It cuts all but the thickest with ease. If I hit a tuff patch I just slow down a little.

 

[BufordBoone]

I have a 12' LandPride wing cutter and I use it on both my M7060 and the wife's L5740.

I'd suspect you will be fine.

 

[Cavjock22]

I appreciate it..
I’ll see what happens.. Also considering a 10’ bushhog 3210.. going to inspect in next week

 

[CADplans]

You just have to be rational in what you expect,,
Here is my 90 inch mower on my little JD 4105,,,

I do not try to mow 6 inch oak trees with it,, :confused2:

 

[Cavjock22]

Pulled the trigger on the 10.6’ Bushhog.. After giving her several hrs of TLC, put her to work..
Previous owner hasn’t serviced the gear boxes. Used 5 gal of gear oil running and draining after it would get warm.. Oil seems still milky even after 5 drains and re-fill. By the way, sucking the oil out with outboard engine oil sucker tank.. Im thinking I cant get all the fluid out.. I looked underneath and I don’t see any drain plug above the stump jumper..
Other than that.. My kubota can handle her very well..

 

[Bigpuddie]

I run a 96 inch I picked up used ( twice) on my 70 hp tractor. Weighs 2400 pounds. Perfect match.

 

[plowhog]

How dry and firm is your soil?

 

[Cavjock22]

How dry and firm is your soil?

My place is very dry and firm.. South Texas.

 

[Cavjock22]

I run a 96 inch I picked up used ( twice) on my 70 hp tractor. Weighs 2400 pounds. Perfect match.View attachment 572033

**** that’s clean for used..

 

[searcyfarms]

you wont run a 12 foot mower on a 60hp tractor around here unless its dry burnt off august and you are clipping the tops at 12 inches tall - I run a 6.5 on my 65hp and its all it wants in 2nd gear if I am mowing it down to 4 to 6 inches - and that is only mowing at about 2.5mph - you couldn't get me to put anything less than 100hp PTO on a 15' batwing mower around here unless I was topping grazed pasture.