Iseki / Massey
- Thread starter kayssupply
- Start date
- Views: 4730
htiek126
Silver Member
- Joined
- Mar 11, 2002
- Messages
- 236
- Location
- Southern Maryland
- Tractor
- Iseki TA270F, Yanmar YM1510D, Mitsubishi MT2201D
Very nice looking tractor. What is the model number? I also wish I had more data on the Masseys...
JerryG
Super Member
I have manuals for the 1200s and the 1400s. What is the engine model?
OP
kayssupply
Platinum Member
It is a TA207. I have had 230,250,262,215 and 270. This is the newest. It has 03 on the rim. I am assuming that it is a 2003. I'll check the engine code this PM. So far the biggest difference I have found in the different TAs is the body mounts that are different but can be interchanged. I swapped a later model set on the TA270 to make a 1250 loader fit. I have pretty much matched the TA270 to an MF1140. The wheels and tires are my addition, thanks to Hey Machinery.
htiek126
Silver Member
- Joined
- Mar 11, 2002
- Messages
- 236
- Location
- Southern Maryland
- Tractor
- Iseki TA270F, Yanmar YM1510D, Mitsubishi MT2201D
So amongst all those models (TA207, 230, 250, 262, and 215), do you think they will all take the same MF1250 mount that you installed for your Bush Hog FEL? As per your advice, I just installed the MF1250 Koyker mount kit on my TA270 and it worked out great. I am just curious if I could the same with the other models.
OP
kayssupply
Platinum Member
It has an E3AG1 prefix. It also has a 61.5" wheelbase, which doesn't match a 1240. The 1240 is the right hp but it has a 63.6" wb.
JerryG
Super Member
I found something. The Massey 1125 used a E3AG1, then it had a suffix of Bo4K. It is also a 24 horsepower. I don't know what the suffix stands for but maybe that will help. I have the engine specifications if you need them. This manual was printed August 1998.
OP
kayssupply
Platinum Member
I have that manual. I am going on the info that the 03 on the wheel means 2003. The wheel date has been correct in the past, but the other poster says that it isn't this time. So far the 1240 could be a newer version of the 1125 but the wheel base doesn't mach this tractor. Is there a 14xx series with 24hp and a 61.5" wb?
JerryG
Super Member
Sorry that I don't have time this morning to look it up. I have to meet an 18 wheeler to get 90k baby chickens. I will try to find it this afternoon.
OP
kayssupply
Platinum Member
No problem.
