SethPerry
New member
New here to TBN. I have an Iseki TL 2300. I have about mastered all components on the tractor with exception of PTO. The components on my particular tractor are the speed selection lever that is located behind my left leg when seated, a push button on the dash "?", a light on the dash panel (to indicate, I quess that pto is engaged) and PTO shaft. If I put the speed selector in gear 1, let out on clutch nothing happens. I press the button, the light on the dash lights up as long as I push, but nothing else. I get off the tractor and lightly spin PTO shaft nothing. Shift the lever to position 2, let out on clutch nothing happens. I press the button, the light on the dash lights up as long as I push, but nothing else. I get off the tractor and lightly spin PTO shaft by hand and it seems to engage, but sound as if not fully and almost as if it has stripped teeth. No lights iluminate. Press clutch and it will stop turning, but when clutch is released it spins again like before. Step on clutch and shift speed back to neutral to totally disengage. Can anyone help with how to operate and ideas of what may be wrong. Is this suppose to be an electrical engagement with the push button? Help! Thanks
Last edited: