Iseki TS1610F steering link

   / Iseki TS1610F steering link #1  

larso1

Gold Member
Joined
Sep 30, 2002
Messages
414
Location
So. Colorado
Tractor
Iseki TS1610F 4x4
Hi,
I just bought this tractor, my first, and am pretty excited about it. I haven't had a chance to go over it yet, but did drive it around some and all the drive train seems to work well. I did notice, however, that there's about a 1/4" slop/play where the steering tie rod, or link(?) connects to the left side front wheel/axle pivot point. There's also a grease zerk there. The right side seems OK, pretty tight. It looks like there is a cover with about six bolts on top of the casting where the bearing resides (sleeve, ball, or roller bearing?). Assuming the slop is not supposed to be there, is this an easy or difficult job to do? Any special tools needed? Thanks for you input,

Bill in CO
 
   / Iseki TS1610F steering link #2  
It isn’t that bad, I will be glad to talk with you about it if you want to call. Anytime after 5pm PST so the boys have gone home and I have time to talk 509-374-3398 or 509-521-1507
 

Tractor & Equipment Auctions

5K BLOWOUT PREVENTER (A50854)
5K BLOWOUT...
71062 (A49346)
71062 (A49346)
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
2010 Keystone Cougar 5th Wheel T/A Travel Trailer (A48082)
2010 Keystone...
Cat 315l Excavator (A50514)
Cat 315l Excavator...
2015 FONTAINE VELOCITY 102" X 48' STEP DECK TRL (A50459)
2015 FONTAINE...
 
Top