Iseki TX2140 Workshop Manual - would like

[Marcle]

Hi Guy's,

Without spending a fortune, is there any TX2140 workshop manuals available, preferably on CD?

At present I'm wishing to identify the parts (PRV etc.) in the hydraulics feeding the front loader.

Thanks in advance

 

[Dave Colantuoni]

The Iseki work shop manual is available on CD (ebay)
very bad photo copy.
It does not cover anything about the FEL hydraulics.
I saw NHMitch already sent you all there is.
BTW: very good photo copy.

You'll need the FEL manual in you case Polymark (Beaver)
If you ever locate Polymark (Beaver) manuals please let me know.

BTW: I'm not even sure there is a Pressure Releaf Valve.



Dave

 

[Dave Colantuoni]

The Iseki work shop manual is available on CD (ebay)
very bad photo copy. It's for the g154,tx1500s (same except engine)
It does not cover anything about the FEL hydraulics.
I saw NHMitch already sent you all there is.
BTW: very good photo copy.

You'll need the FEL manual in you case Polymark (Beaver)
If you ever locate Polymark (Beaver) manuals please let me know.

BTW: I'm not even sure there is a Pressure Releaf Valve.



Dave

 

[NHmitch]

I'll look a bit more and see if I can find anything else related to the hydraulics in the service manual, but I don't think that there is because the loader was optional with the tractor. The hydraulic pump that runs the 3 point is standard, and I should have some info on that if you need it, Dave, you are right about the manual being difficult to see. Who ever copied the manuals for sale did not do a very good job at all. I'll see what I can find..

 

[Marcle]

Hi guys,

I found a guy on the UK ebay site selling manuals and have purchased a copy. It is a photocopy. I've not looked all the way through, but the pages I wanted seem fine.

On a different Iseki forum I did come across a guy in the states offering hardback copies, but with the shipping to the UK they were quire expensive.