Hello, new member here. I have a 2004 Kubota M6800 and a Woods 9000 backhoe that I bought from my grandfather. He always used a regular top link for the backhoe (3ph mount) but I have found it makes the hoe pretty ineffective. I'm hoping to find someone who fabbed their own subframe and may be willing to sell me their old structural top-link components. Anybody?
ISO: Woods backhoe 3ph top link components
- Thread starter VTM6800
- Start date
- Views: 5636
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Woods does not offer those parts? There should be a heavy A frame incorporating the lower link mounts and an adjustable but rigid top link mount. This assembly prevents the backhoe frame from raising the tractors hitch linkage. Using a standard tractor top link increases the rush of link failure and injury or death of the operator by crushing.
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,189
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
Based on my dealings with Woods (great consumer support for me) they did not make a subframe for the 9000, just a heavy duty top link and assembly called a Saf-T lock like on the left side of the pic.
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Which is what I was trying to describe, however inadequately.
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,189
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
And several years ago my dealer in Fredricksburg, Va found the parts in the system but they were well over $1,000.
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Contact this TBN member who posted last year about converting his BH750 to a subframe. https://www.tractorbynet.com/forums...ods-bh750-2-modified-sub.html?highlight=Woods
He may have something that you can use.
He may have something that you can use.
Thanks for the replies. I am aware of the Saf-T Lock setup but was avoiding spending $1000 on all the components from Woods. I will start fabricating my own in a few weeks if I don't locate a used setup somewhere. Does anyone have the heavy duty top link (Saf-T lock or similar) and could tell me the thickness of the steel?
dfkrug
Super Member
- Joined
- Feb 3, 2004
- Messages
- 7,619
- Location
- Santa Cruz Mtns, CA
- Tractor
- 05 Kioti CK30HST w/ Prairie Dog backhoe, XN08 mini-X
I have several of the cloned "Saf-T Lock" setups that NEWBURY shows in his diagram. They came with the Woods 7500 clones that I bought new. Of those 10 Prairie Dogs (made in Bulgaria), nine were the 7500 copies, and one was a 1050 copy, 10-footer.
Of all those units, only one was used on a 3-point hitch, and the enhanced toplink was damaged and replaced once. But that was on a Category 2 hitch on an industrial Case 480LL. All the Prairie Dog hoes came with the enhanced toplinks, but I (or my buyer) made subframes instead.
Here is a photo. I can go get some dimensions. The parts, all unused, would be heavy to ship so fabbing from scratch may be a better way to go.
