Loader JD 1250 weak loader. Help needed

/ JD 1250 weak loader. Help needed #1  

chrisp223

New member
Joined
Oct 3, 2014
Messages
3
Location
south berwick
Tractor
JD 1250
I'm having a problem with my front end loader. When I lift the bucket the hydrolyics sputters and jerk. I have replaced all hydrolytic filters and got a new hydrolytic pump put in and have rebuilt the cylinders on the bucket. Would appreciate any help.
 
/ JD 1250 weak loader. Help needed #2  
:welcome: to TBN

When you say "lift the bucket", you are speaking of raising the arms of the FEL, and not curling the bucket?

Was this "sputter and jerk" the same problem before hydraulic filter, pump, and rebuilt cylinders that is continuing? or has started after the fixes?
 
/ JD 1250 weak loader. Help needed #3  
Have you checked:
Oil level?
Quick couplers properly connected?
Could Quick couplers be cross connected?

Try swapping boom hoses with bucket hoses to see if the valve is worn/internally leaking.
 
/ JD 1250 weak loader. Help needed
  • Thread Starter
#4  
It happens when I lift and curl and the problem was what sparked the repairs but even with all the new parts I am still having the problem.
 
/ JD 1250 weak loader. Help needed #5  
What can you tell us about the history of the tractor and FEL. Age, hours, ownership, etc.
 
/ JD 1250 weak loader. Help needed #7  
Possible hyd relief valve not set to spec's. Check hyd pressure with a gauge.
 

Marketplace Items

2013 JOHN DEERE 310SK BACKHOE (A62129)
2013 JOHN DEERE...
SEMI AUTOMATIC QUICK CHANGE FOR MINI EXCAVATOR (A58214)
SEMI AUTOMATIC...
2014 FVCG TRAILER (A61567)
2014 FVCG TRAILER...
2015 BMW 740i Sedan (A61569)
2015 BMW 740i...
Vermeer 604 XL-Series (A62177)
Vermeer 604...
Stainless Steel 4HX96A Commercial Venta Hood with Exhaust Fan (A60352)
Stainless Steel...
 
Top