JD 2720 now available

   / JD 2720 now available #1  

shot_gun

Gold Member
Joined
Mar 17, 2008
Messages
386
Location
NJ
You can now order a 2720 and they should be hitting dealers by the last week of may.
 
   / JD 2720 now available #2  
That's good news, shot_gun! Couldn't find anything on the JD website -- build your own, etc., though.

What are the differences between this new model and the 2520 or the 3005 model's?

Thanks again, for the head's up.

AKfish
 
   / JD 2720 now available #3  
See my reply to an earlier 2720 post...
 
   / JD 2720 now available
  • Thread Starter
#5  
Info should be coming any day now. List price is $17299 for R3's or R4's. Here are the specs hopefuly.

MANUFACTURER
MODEL John Deere
2720

Engine

Manufacturer Yanmar 3TNV88

Engine HP (kW) - gross 31 (23.1)

PTO HP (kW) - Gear transmission ---

PTO HP (kW) - Hydrostatic transmission 23.5 (17.5)

Rated engine speed, rpm 2500

Type Direct injection

Operating range 1000-2650

Aspiration Natural

Cylinders/Displacement, cu. in. (liters) 3 / 100 (1.642)

Cylinder Liners Cast-in-block

Bore and Stroke, mm (in.) 88x90 (3.46x3.54)

Compression Ratio 19.1:1

Lubrication Pressurized

Cooling System Water pump

Air Cleaner Dry-type, two stage

Engine Shutoff Key switch

Engine Torque @ rated speed, ft./lb. (N/m) 63 (85.4)

Fuel Tank Cap., US Gal. (L) (Open; Cab) 7.1 (27); NA

Electrical

Type 12 volt

Battery Size (CCA) 500

Alternator (12 volt, amp) 40

Starter Size, hp (kW) 1.4 (1.04)

Fuel System

Type Diesel

Injection Pump Type Gear

U.S. gal./hr (L/hr) @ 100% load* 1.4 (5.3)

*Fuel consumption rate should be used for comparison purposes only. ---

Transmission

Std. Transmission; Forward/Reverse Hydro - 2 Range

Opt. Transmission; Forward/Reverse ---

Left-Hand Reverser NA

On-The-Go Shifting (Yes/No/Partial) NA

Direction Reverser; Forward/Reverse Twin Touch pedals

Final Drive Spur gear

Brakes Wet disk

Steering Power steering

Clutch; Wet/Dry NA

Clutch Disk Diameter, in. (mm) wet clutch ---

Drawbar Tongue Weight Capacity, lb. (kg) 562 (255)

Axle Capacity (in operation) ---

Front, lb. (kg) 1940 (880)

Rear, lb. (kg) 2426 (1100)

Creeper NA

Hydraulics

Type Open Center

Pump Rated Output, gpm (L/min.) 10.5 (39.6)

Steering 5.5 (20.8)

Implement 5.0 (18.8)

Pump Type Gear

Maximum Operating Pressure (PSI) 2421

Draft Control Type Position Control

Remote Control Valves Available 2

3-Point Hitch

Type Category I

Lift Capacity (24-in. behind link arms), lb. (kg) 1314 (596)

Lift Capacity @ lift link ends, lb. (kg) 1433 (650)

Power Take-Off (PTO)

Standard Standard Rear @ 540 RPM and Mid @ 2100 RPM std.

Optional ---

Control Independent

Clutch Wet disk

Brake (for Mid and Rear PTO) Wet disk

Fluid Capacities

Fuel Tank, gal. (l) 7.1 (27)

Cooling system (includes coolant bottle), qt. (l) 4 (3.85)

Crankcase with filter, qt. (l) 4 (3.6)

Transmission and Hydraulic System, gal. (l) gear ---

Transmission and Hydraulic System, gal. (l) hydrostatic 3.9 (14.6)

Front Axle Gearcase (MFWD axle), gal. (l) 0.9 (3.4)

Final Drive

Type Spur Gear

Engage On-the-Go Rear Differential Lock Yes

Operator Station

Rollover Protective Structure OSHA, SAE, ASAE

Rigid - Foldable - Telescopic Foldable

Platform - Flat/Straddle Flat

Gear Shift Location - Console/Floor Left-Hand-Side

Cab

Compliance ---

Visibility ---

Air Conditioning, Temperature Differential ---

Doors ---

Platform - Flat/Straddle ---

dB(A) Rating ---

Seat Suspension System ---

2WD Dimensions

Wheelbase, in. (mm) ---

Front Tread Range, in. (mm) ---

Rear Tread Range, in. (mm) ---

Minimum Rear Tread Setting, in. (mm) ---

Front Axle Clearance, in. (mm) ---

Turning Radius w/Brakes, ft. (m) ---

Turning Radius w/o Brakes, ft. (m) ---

Unballasted Operating Weight, lb. (kg) ---

Approx. Ship Wgt, lb. (kg) Open; Cab ---

MFWD Dimensions

Wheelbase, in. (mm) 65.2 (1655)

Front Tread Range, in. (mm) 32.7 (830)

Front Axle Clearance, in. (mm) 13 (330)

Turning Radius w/Brakes, ft. (m) 7.5 (2.3)

Turning Radius w/o Brakes, ft. (m) 8.2 (2.5)

Limited Slip Differential ---

Unballasted Operating Weight, lb. (kg) ---

Approx. Ship Wgt, lb. (kg) Open; Cab 1973 (895)

Standard Tires

2WD ---

Front ---

Rear ---

MFWD ---

Front 23x8.5-12 R4

Rear 14-17.5 R4

Miscellaneous

Underhood Muffler Yes

Joystick SCV Control Yes

Inboard Planetary No

Axle Type Flanged

Brakes - Type and Control Wet Disk
 
   / JD 2720 now available
  • Thread Starter
#6  
Try the configurator now. I just did it on the dealer side and we use the same version that you guys do. It should work.
 
   / JD 2720 now available #7  
Doesn't look like it is there yet for civilians... :D
 
   / JD 2720 now available #8  
That's pretty disappointing if accurate; exact same hydraulics as 2520, so all they added was a few HP. I don't seem to recall a lot of owners complaining about a lack of power in the 2520.

shot_gun said:
Info should be coming any day now. List price is $17299 for R3's or R4's. Here are the specs hopefuly.

MANUFACTURER
MODEL John Deere
2720

Hydraulics

Type Open Center

Pump Rated Output, gpm (L/min.) 10.5 (39.6)

Steering 5.5 (20.8)

Implement 5.0 (18.8)

Pump Type Gear

Maximum Operating Pressure (PSI) 2421
 
   / JD 2720 now available #9  
Perhaps the 2720 is the 'fix' for the 3-point hitch problem?
 
   / JD 2720 now available #10  
ChuckinNH said:
Doesn't look like it is there yet for civilians... :D

Try this, a little adjusting to the link for the 2520 configurator;)

Right click on the 2520 "build your own" and copy the link. Paste it into the address bar, replace the 5 with a 7 in 2520 and hit enter.
 

Tractor & Equipment Auctions

Golf Cart (A44572)
Golf Cart (A44572)
New/Unused 6ft Vibratory Roller Skid Steer Attachment (A44391)
New/Unused 6ft...
1997 Mack RD688P Truck, VIN # 1M2P266Y6VM029281 (A44391)
1997 Mack RD688P...
Komatsu D41P Crawler Dozer (A44391)
Komatsu D41P...
2003 VIKING  CEMENT MIXING TRAILER (A45333)
2003 VIKING...
Club Car Carryall 1500 4x4 Utility Cart (A44572)
Club Car Carryall...
 
Top