js127227
New member
I am having a problem with the high/low/park shifter lever. The backhoe wants to move when the shifter is in the neutral position. When you shift it into low the backhoe just bogs down. I also noticed you can pull the lever all the way back towards you on the low side which I don't think you should be able to do. I took the top cover off of the transmission so I can see the shifter forks. Everything seems to be working properly. The set screw for the high/park shifter was loose so I did tighten that up. I tried to see if the shaft would move for adjustment but it did not so I just tightened it down. Everything else looks intact. The shifter lever is not broke at all. The forks that the lever go to are aligned also. I must be over looking something simple. I parked it one day after using it for several hours and the next day it won't move. Any help would be greatly appreciated!!
