JD 410 loader tilt cylinder rebuild

[Garykk]

It’s been a long time since I’ve been on this site. The old 410 has served me well but one of the tilt cylinders on the loader is now leaking. I rebuilt them many years ago but I’ll be darned if I remember how to take it apart. I know the bucket end unscrews but I think there’s a lock pin somehwere and my notes don’t show it. Any of you old timers out there remember how to do this?

 

[jyoutz]

I used to have a JD4100 with 410 loader. I actually removed and reinstalled that cylinder. From what I remember the cylinder was easily removed with wrenches. Just jiggle the joystick a few times after shutting off the engine to release pressure.

 

[Garykk]

Thanks but I need to know how to get the cylinder rod guide off the cylinder itself.

 

[beenthere]

Does it have the wire threaded in there to lock it?

 

[Garykk]

Does it have the wire threaded in there to lock it?

I think the spot marked is a lock but not sure how remove it.

 

[jyoutz]

Thanks but I need to know how to get the cylinder rod guide off the cylinder itself.

My mistake. Your photo shows it on the loader. I removed it and took it to a hydraulic shop.

 

[Garykk]

I cleaned off that part, looks to be just a dimple. I’m pretty sure the rod guide just screws off with a spanner wrench and that dimple is a guide. I’ll find out in a few days when the weather gets a little warmer.

 

[Harry in Ky]

This looks like it could be your cylinder. If so, pick at the lock ring in the hole on the side. Pull it up slightly and rotate the gland while doing so and the lock ring should come out. I try to do this while it's still on the machine. Eliminates the need work in a vise.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/454/referrer/navigation/pgId/1493545

 

[beenthere]

A video that may help. But think that dimple is for a lift cylinder wire in lieu of the snap ring shown in this video.

H169902: Bucket and Lift Cylinder Wire | H169902

Wire

shop.deere.com

 

[beenthere]

Here is video with lift cylinder wire involved.