nebraskasparks
Gold Member
- Joined
- Jun 4, 2010
- Messages
- 266
- Location
- Northern Illiniois
- Tractor
- 2010 Kubota L5740 HST and JD X734
Operating manual showed a different number than the internet. Called dealer and parts person said the manual part number was outdated. Replaced fan belt with #M800347 from the dealer which matched the internet information.
Tried to install it and it was too wide and tight. Won’t tell you how long I tried to “make it work”. Called dealer this morning and they found a bulletin showing that supplier specs were in fact too big and to use off shelf replacement. JD toothed belt came in just under 1/2 inch. Exchanged for A and I products A-3L360 which is 3/8” x 36” non-tooth. Installed quickly. Runs good.
Tried to install it and it was too wide and tight. Won’t tell you how long I tried to “make it work”. Called dealer this morning and they found a bulletin showing that supplier specs were in fact too big and to use off shelf replacement. JD toothed belt came in just under 1/2 inch. Exchanged for A and I products A-3L360 which is 3/8” x 36” non-tooth. Installed quickly. Runs good.
