Jd 4310 mfwd selenoid wires

[disco]

Wires got pulled out of weather pack connector. Found new female pins at case dealer. Blue bobcat wires worked. Got pto hooked back up. Working good. Anybody know what wire coming out of mfwd selenoid is the hot wire?
Thanks

 

[beenthere]

Post a pic or two of the problem and the solenoid and I'll see what the service tech manual shows for the hot wire..

You say "working good".. is there something not working?

 

[disco]

Pto wires are in same connector as mfwd wires. Pto works as should after reattaching wires. My question is I know on the male side coming from switch. White is hot and black is ground. 2 wires coming from mfwd selenoid are black. Does it matter? I would think so. Which one is the hot wire.
Thanks

 

[disco]

Went with the one on the left. It was the hot wire on the pto side.

 

[Zebrafive]

Pto wires are in same connector as mfwd wires. Pto works as should after reattaching wires. My question is I know on the male side coming from switch. White is hot and black is ground. 2 wires coming from mfwd selenoid are black. Does it matter? I would think so. Which one is the hot wire.
Thanks

A solenoid is just a coil. I ASSUME hook up either way will work.