Oct 28, 2016 / JD 5425N #1 DLTTrekkers Veteran Member Joined May 12, 2014 Messages 1,584 Location Paarl South Africa Not starting and blows a fuse when in neutral Found the problem at the neutralswitch. I had to get a new switch , but that switch was to long. Had to cut the plastic off the new switch and solder the old switch s wires to the new switch.
Not starting and blows a fuse when in neutral Found the problem at the neutralswitch. I had to get a new switch , but that switch was to long. Had to cut the plastic off the new switch and solder the old switch s wires to the new switch.
Oct 29, 2016 / JD 5425N Thread Starter #2 OP DLTTrekkers Veteran Member Joined May 12, 2014 Messages 1,584 Location Paarl South Africa This switch is under the seat on the inside of the gearselectorhousing that needs to be removed to do the replacement
This switch is under the seat on the inside of the gearselectorhousing that needs to be removed to do the replacement
Nov 5, 2016 / JD 5425N #3 J jd110 Veteran Member Joined Dec 31, 2001 Messages 1,576 Location Maryland Sounds like they sold you the wrong switch, but you made it work, so all is well.
Nov 5, 2016 / JD 5425N Thread Starter #4 OP DLTTrekkers Veteran Member Joined May 12, 2014 Messages 1,584 Location Paarl South Africa The switch with the wires no linger avalible.
Nov 5, 2016 / JD 5425N Thread Starter #5 OP DLTTrekkers Veteran Member Joined May 12, 2014 Messages 1,584 Location Paarl South Africa DLTTrekkers said: The switch with the wires no longer avalible Click to expand...