Backhoe JD 990 with a 8a Backhoe

[Al Ben]

JD tech says that this JD 8a backhoe can not be attached to a JD 990 with a 430 Loader !

I have the JD 8a with a 4" channel subframe but I do not see any attachment points on the rear of the tractor .

Anybody have this combination installed ?

Or do you have a JD 8b Backhoe installed and can show me the attachment points to make a DIY attachment.

Thanks,
Al in Dundas, ON

 

[sal64]

hello i have a jd 990 with a 430 loader and a 8a backhoe here are some pics mady this will help you i dont have a pic of the hoe its in another location. ,

 

[Al Ben]

Thanks Sal64 for the reply. Pics are worth a thousand words !
So the tractor reinforcing frame is a 5" x 1 3/4" boxed channel ? Which is the backhoe support channel size.
And the forward attachment point is the lower loader pivot at the brake pedal ?
And the rear attachment is bolted to the ROPS supports ?
Thanks,
Al in Dundas, ON

 

[sal64]

the reinforcing frame is solid steel 1 inch thick.the rear snaps in with that spring pin in the first pic.

 

[Al Ben]

Okay, now it makes the parts list sensible.
Just looked under my 990 and see what goes where.
Thanks again,
Al in Dundas, ON

 

[Al Ben]

Hi Sal,

I bit the bullet and ordered JD Kit BM17019 on Dec. 21, 2012 and picked it up today; makes much more sense than chasing down and McGyvering the ? 790 ? sub-frame that came with the JD 8A Backhoe, bolt ur on and extend the hydraulics to the mid-point.

Thanks again,

Al Ben in Dundas, ON

 

[Willl]

Hi Al, congrats on the purchase.

Curious as to why you mentioned the 790 ?, also curious as to how much the kit cost you ?

I've got a 790 w/ 3pt hoe and at times have thought of a sub-frame upgrade.

 

[Al Ben]

Should have said the JD 8A Backhoe came with a frame which fits a JD 50 or JD 70 series tractor.
The kit cost $ 1800.00 CDN with tax.