JD2010 Inj. pump timing

   / JD2010 Inj. pump timing #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
Does anyone have an injector pump timing proceedure including the oil pump position for a JD2010? I have an I&T manual, which is totally inaccurate in many respects including this one. rosemeadoil@discoverycoast.net
 
   / JD2010 Inj. pump timing #2  
Maybe you'll get a specific answer. This one is generic. On many tractors, injector pump timing is done by matching up marks on the crankshaft gear and pump drive gear. It's like timing belts on cars. It's a gross adjustment of getting the right gear teeth meshed rather a fine-tuning. The gears are keyed, so the orientation of the gear on each shaft is guaranteed, and just matching up the marks correctly times the pump. The adjustment may be simple, but substantial tear down is required since the timing gear cover on the front of the engine has to be removed.

On the other hand, the spill time adjustment, which often is associated with pump timing, is a fine adjustment. It is fairly straightforward, but more complex.

It strikes me that pump timing, itself, is simple enough that a dealer's shop manager may be willing to describe it to you. However, you should consider yourself lucky if they'd also describe the spill time adjustment.
 

Tractor & Equipment Auctions

2011 KENWORTH T800 SLEEPER (A50854)
2011 KENWORTH T800...
2000 KOMATSU VALMET 860.4 FORWARDER (A51222)
2000 KOMATSU...
Crash Mobile S/A Trailer (A50324)
Crash Mobile S/A...
2013 FELLING  SKINNYNECK TA LOWBOY (A50854)
2013 FELLING...
2013 LONE STAR TRAILER MFG. (A50854)
2013 LONE STAR...
2018 FREIGHTLINER M2 26FT NON CDL BOX TRUCK (A51222)
2018 FREIGHTLINER...
 
Top