JD2320 What Box Blade size

[JDGREEN1]

What size box blade to get for a JD2320 4' or 5' ? Found a good deal on a 5' Woods box blade but wondering if thats to big for the JD2320.

 

[hizoot]

I use a 5' on my 2520. I guess it depends on your soil and what you plan to do with it. We have mostly sandy soil,and it does well here...it will strain for traction as the box gets full though.

 

[jenkinsph]

I would suggest the 4' boxblade as the best fit. If you lower the rippers in any type of tight soil you will have all you can handle.

 

[D33r3 6r33N]

4' on my 2305. You have "more" tractor than I do but still think a 4' is what I would go with.

 

[scrappy isb67]

I went with 4' on my 2320. My tractor has no problem with the 4' BB so far. I debated the 4' or 5' but finally decided to go with the 4' because it covers the tractor's width and shouldn't be too much for the tractor where a 5' might be.

 

[glc24]

I've been doing alot of info searching myself,concerning BB size for my tractor.
If the 5' is pretty much max for a 2520, the 4' would be best for the 2320.
my.02

Greg

 

[JDGREEN1]

Well I barrowed a friends 5 foot King Kutter box blade to see how the JD 2320 would handle it. I smoothed out the paddock area around the horse barn. Then did some maintenance on our motocross track. The 5 foot BB worked like a charm behind the JD 2320. So I traveled over to the dealer and picked up a new 2009 left over 5 foot Woods box blade for a good deal. The 5 foot BB was $380 less than a 4 footer. I do not plan on lowering the scarifies all the down so I believe the 5 foot BB will work just fine with out putting to much stress on the tractor.

 

[KennyG]

I think you made the right choice. I have a 5 foot blade on my 2320 and can't imagine not having a little overhang on the blade.