JD2640 Hi/Lo Range

   / JD2640 Hi/Lo Range #1  

LHughes

New member
Joined
Sep 21, 2009
Messages
3
I have a JD2640 that is stuck in low range. Has anyone else had this problem?
 
   / JD2640 Hi/Lo Range #2  
Do you mean the left shift lever between your legs? or the shift lever to the left of the steering wheel on the dash? If it is the left lever between your legs/ you will need to remove a snap ring securing the lever that is under the rubber boot. Pull the shift lever out and then reach down into the hole with a long screwdriver to align the 2 shift rails into neutral. Then reinstall the lever and all should work again. If it keeps getting jammed, then one or both of the internal shift rails may need to be replaced.
 
   / JD2640 Hi/Lo Range
  • Thread Starter
#3  
It is the lever between your legs. Thank you, for your help. I will try that tonight.
 
   / JD2640 Hi/Lo Range #5  
Great! Glad to hear you are back running.
 

Tractor & Equipment Auctions

2001 INTERNATIONAL 4700 4X2 SERVICE TRUCK (A52706)
2001 INTERNATIONAL...
NEW Thiessen Track Closer Disk (A55302)
NEW Thiessen Track...
UNUSED FUTURE 44" PIN ON RAKE (A54757)
UNUSED FUTURE 44"...
Toro Workman MDX Utility Cart (A51694)
Toro Workman MDX...
20 Ton Hydraulic Bottle Jack (A55787)
20 Ton Hydraulic...
GMC 3500 Extended Cab 4WD Pickup Truck - 6L V8 Gasoline Automatic (A55302)
GMC 3500 Extended...
 
Top