Jinma 284 shuttle shift - sequence of operations

   / Jinma 284 shuttle shift - sequence of operations #1  

Foggy

New member
Joined
Apr 20, 2006
Messages
19
Location
Atherton Tablelands, Australia
Tractor
Jinma 284LE (2006)
Hi all,

I'm seriously considering a Jinma 284 with shuttle shift for mowing, FEL work, and general project work on my 5.5 acres.

I'm a bit confused about how the Jimna shuttle shift works, so can someone with experience with one walk me through the sequence of operations in a typical fwd-rev situation? Eg, I'm approaching a pile of dirt that needs to be relocated - what do I do next?.

I saw one web site that hinted that the shuttle was a synchro shuttle - can anyone confirm or deny that?

Cheers, Foggy
 
   / Jinma 284 shuttle shift - sequence of operations #2  
I haVE THE 284 shuttle shift. With the lever up, you go forward, down you go in reverse. The speed is the same forward or backward. You have to stop to shift from forward to reverse. Very handy for moving dirt, I really like mine.
 
   / Jinma 284 shuttle shift - sequence of operations #3  
1. Going forward into the pile, complete your scrape, rollback
scoop and lift.
2. Depress clutch and stop tractor.
3. Shift to reverse.
4. let out clutch and back out of pile/turn around.
5. Depress clutch and stop tractor.
6. Shift to forward and drive to dump location to empty loader
bucket.
7. Repeat as necessary:)
 

Tractor & Equipment Auctions

2018 Ford F-150 (A51039)
2018 Ford F-150...
3000 Gallon Black Poly Water Tank (A49461)
3000 Gallon Black...
2012 Infiniti G25 (A50324)
2012 Infiniti G25...
1240 (A50490)
1240 (A50490)
AMCO F42B-3626CS 13ft Pull-Behind Wheel Offset Harrow Tiller (A49461)
AMCO F42B-3626CS...
2008 Ford F-250 Knapheide Service Truck (A50323)
2008 Ford F-250...
 
Top