Farwell
Veteran Member
I am having problems with my sediment bulb leaking and haven't been able to get it to stop. Any one know if there is a replacement for the sediment bulb. I was thinking about an in line fuel filter as a replacement.
John Deere 2010 sediment bulb repalcement
- Thread starter Farwell
- Start date
- Views: 1964
-
- Tags
- john deere 2010
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,541
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Isn't there a cork washer that seals to prevent leakage? Seems I remember getting good results when I replace it, as the old one was a bit brittle and hard.
The glass bowl itself should be okay.
The glass bowl itself should be okay.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If not a cork washer.. then a neophrene gasket.. either should work. An in-line fuel filter is not the same beast as a sediment bowl/water seperator..e tc.
Soundguy
Soundguy
I checked the cork and it seemed to be soft enough. The cork was the first avenue that I was going to take but the inline filter came to mind. After thinking about over night it dawned on me that a fuel system that has a filter in it probably has pressure in it, where my tractor probably works on a vacuum. Thanks guys, I am going to hit the Napa parts store today for a gasket.
