Backhoe john deere 310 d
- Thread starter danny223
- Start date
- Views: 4723
-
- Tags
- john deere 310
Tx Jim
New Member
My JD expertize is with AG tractors but my guess is if this(AT168632 KIT, SEAL ADD 24.22 USD) won't repair the problem then you'll need this AT318271 VALVE,STEERING ADD 1,207.51 USD. From viewing parts catalog the seal kit is the only parts I saw available for steering valve.
AKfish
Super Member
- Joined
- Oct 1, 2004
- Messages
- 5,420
- Location
- Alaska
- Tractor
- JD 5115M; JD 110 TLB; JD 4720; Ford 9N; JD X300R
Sounds like you've narrowed the problem down... that's good!
Not intending to derail the OP's thread but I've got an additional question for Tx Jim and other "technical" posters - can the steering valve be rebuilt?
Having to shell out ~$1,300 plus shipping, plus the time and labor to install --- how about pulling the old valve and getting it reworked?
AKfish
Not intending to derail the OP's thread but I've got an additional question for Tx Jim and other "technical" posters - can the steering valve be rebuilt?
Having to shell out ~$1,300 plus shipping, plus the time and labor to install --- how about pulling the old valve and getting it reworked?
AKfish
Tx Jim
New Member
Yes the steering valve can be rebuilt. The tricky part on those Dubuque/Mannheim steering valves is getting the 6 larger o-rings in the "correct grooves" and being sure the 2 valve operating bodies are "shimmed correctly".
Years ago I had a customer that bought an 820 open-center,manual steering tractor and then decided he wanted to install a frt end loader. Then he wanted power steering which wasn't available as a kit. I ordered all the necessary parts,assembled the unit and installed it. It even worked correctly.
Years ago I had a customer that bought an 820 open-center,manual steering tractor and then decided he wanted to install a frt end loader. Then he wanted power steering which wasn't available as a kit. I ordered all the necessary parts,assembled the unit and installed it. It even worked correctly.