john deere 401C backhoe

   / john deere 401C backhoe #1  

darrel koozer

New member
Joined
Jan 28, 2014
Messages
2
Location
Harpers Ferry, Iowa
Tractor
John Deere 401C
my back hoe hydralics respond as soon as u pull a lever, however forward & reverse movement of tractor takes about 7-10 seconds before it will move. since transmission & hoe have the same hydralics why does it take so long to move? does it winter & summer. Help.
 
   / john deere 401C backhoe #3  
I'm presume you have routinely serviced hyd filters & sump screen???????????? Reverser is operated from trans pump where the pressure is delayed to help preserve clutch disk from abrupt engagement. IIIRC there's a valve that can be adjusted to decrease clutch engagement time. Other hyd functions operate from frt hyd pump.
 

Tractor & Equipment Auctions

2008 INTERNATIONAL WORKSTAR 7400 SFA 6X4 DUMP TRK (A51406)
2008 INTERNATIONAL...
UNUSED LANDHONOR 5/16" 7' G80 DBL CHAIN SLINGS (A54757)
UNUSED LANDHONOR...
2017 TROXELL 150 BBL ALUMINUM VACUUM TRAILER (A53843)
2017 TROXELL 150...
UNUSED EINGP F10 - 10' WROUGHT IRON SITE FENCE (A54757)
UNUSED EINGP F10 -...
2014 MACK GU713 WATER TRUCK (A51247)
2014 MACK GU713...
2016 CATERPILLAR 306E EXCAVATOR (A52705)
2016 CATERPILLAR...
 
Top