John Deere 5205 Will not start.
- Thread starter Bassmat
- Start date
- Views: 24085
-
- Tags
- john deere 5205
rpottsl
New member
- Joined
- Jul 29, 2013
- Messages
- 7
- Location
- Campbell, TX
- Tractor
- Farmtrac 545DTC, Ford 2600, Fiat 100=90DT
Can I get a copy? Helping a neighbor with a no start head scratcher, tech manual would be a huge help! Email is Rpottsl@att.net
Last edited:
skyhook
Veteran Member
- Joined
- Mar 12, 2013
- Messages
- 1,906
- Location
- Canada Ontario
- Tractor
- 1996 Kubota L4200 GSTC,(sold) 1994 JCB 210S 4x4x4
Bassmat, you seem to have a good knowledge of testing,
if tha diagram provided by JD5210 is correct, remove the fuse for the "fuel shut off solenoid",
then test the " ignition side of the fuse" for a short to ground, if this doesn't short to ground, then you know your problem is on the other side of the fuse, The wire to the solenoid relay or to the solenoid on the pump itself. You can then disconnect the solenoid on the pump and do your test for a ground "again",
this will eliminate the solenoid on the pump. do the same for the relay, my guess is thats it a grounded wire in that circuit that has lost some of its insulation, been there, done that.
Good luck
if tha diagram provided by JD5210 is correct, remove the fuse for the "fuel shut off solenoid",
then test the " ignition side of the fuse" for a short to ground, if this doesn't short to ground, then you know your problem is on the other side of the fuse, The wire to the solenoid relay or to the solenoid on the pump itself. You can then disconnect the solenoid on the pump and do your test for a ground "again",
this will eliminate the solenoid on the pump. do the same for the relay, my guess is thats it a grounded wire in that circuit that has lost some of its insulation, been there, done that.
Good luck
