Oil & Fuel John Deere 5310 Hydraulic Leak

[Fowlhunter22]

I have searched parts catalogs until my eyes are crossed and cannot seem to find out what the pet is under my gas tank on rear of tractor to the right of PTO and differential where hoses hook into. I noticed after working tractor the other day for a good bit there was hydro flying dripping down on differential from this. It could be hose connections or o rings but anyways please help identify what this box is called. Thanks for any help.

 

[beenthere]

Looks like the SCV (Selective Control Valves) and appears to be three... are they linked to control levers?

Is this with cab? or without?

:welcome: to TBN

 

[Fowlhunter22]

Looks like the SCV (Selective Control Valves) and appears to be three... are they linked to control levers?

Is this with cab? or without?

:welcome: to TBN

This is without cab. It's a 1998 open station 5310 with FWD, FEL, and hopefully one day a lot more attachments. I have. It had t Actor that long, and this is my first tractor but sure couldn't find anything on web about what that was. So what does 3 SCVs mean? Yes on the backside of that goes to the joystick for FEL

 

[Tx Jim]

Welcome to TBN
Ditto what beenthere stated as valve in photo appears to be scv. O-ring(key 10) is part number 51M7043

 

[Fowlhunter22]

Welcome to TBN
Ditto what beenthere stated as valve in photo appears to be scv. O-ring(key 10) is part number 51M7043

Wow I need to make more posts you guys have been very helpful! Thanks to both of you

 

[JD5210]

In case you did not get an operators manual here is a link to one:

http://manuals.deere.com/omview/OMRE71736_19/

You might consider looking at selectmanuals.com and for $34.95 download the tech manual

 

[Fowlhunter22]

Dang glad you told me about the technical manual! I have the operators manual, it came with that tractor. This is my first tractor and have a little mechanical knowledge but I mean a little. So when this problem came up and I noticed the leak I realized I needed the technical manual are they are HIGH as a hard copy (like 159) on eBay. Thanks again for another great tip!

 

[JD5210]

The following is some info you may or may not find useful.

Not the same tractor, but the same fuel system

JD 523 John Deere tractor fuel filter change - YouTube

When you replace the fuel filter, fill up the tank and fill-up the new filter before putting on and you should not have to bleed it.

If it turns over, but does not want to start, take a look at this post. Common problem with 3029 engine

http://www.tractorbynet.com/forums/...-you-have-5000-series.html?highlight=RE503242

 

[Fowlhunter22]

More help for the newbie here. After taking off the fender and having every socket in my toolbox out I cleaned everything off and found the leak. It is from where the SCV is mated with possibly the third SCV and the tractor. It appears that it is coming from two different spots. Is there a seal where all of this joins? Also the 4 bolts that pull all of this together where loose and I tightened them, the leak went from a drip every couple of minutes to a seep. Attached are pictures. Thanks for any help you can give.

 

[beenthere]

Of the 6 pics posted, are there just two that are different? Or some subtle differences you want to show between the six ?? Just curious...
Maybe an arrow to show where the leak is.. or what is now a seep.

The 3 SCV are mated with tubes and o-rings.. no gasket/seal, if I read the parts lists correctly.

 

[Fowlhunter22]

Sorry about that, here is only 2 pictures that are different. I didn't realize I posted the same two 3 different times. The leak is in between where I guess what would be considered the housing?

 

[Fowlhunter22]

Here are the same pictures. Where the yellow lines I have drawn are where the leaks are.

 

[Fowlhunter22]

Of the 6 pics posted, are there just two that are different? Or some subtle differences you want to show between the six ?? Just curious...
Maybe an arrow to show where the leak is.. or what is now a seep.

The 3 SCV are mated with tubes and o-rings.. no gasket/seal, if I read the parts lists correctly.

What parts list are you looking at Beenthere? I have looked at jdparts and am not able to find anything that looks like an print where the housings join. Thank you

 

[Fowlhunter22]

After looking somemore at some selective control valves it doesn't appear there is an outing in between the housings. Just internally on valves, and housings are just metal to metal. Would I be leaking because the internal prints are worn out and need replacing?

 

[beenthere]

hunter
Here is a pic of what I see in jdparts. shows what are called "tubes" between the stacked valves.. (at least as I can interpret).
Finding in jdparts.com sometimes is a bit frustrating, but going to the model 5310, then go to "alphabetical" and to "V" for valves.. down to "valves Single third selective control.
http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt