JOHN DEERE 790 rear hydraulic addition
- Thread starter hdhawg7
- Start date
- Views: 10155
-
- Tags
- john deere 790
gasman1075
Bronze Member
- Joined
- Jan 29, 2021
- Messages
- 99
- Tractor
- JD 2032R
I bought a power beyond kit from JD for my 790 a few years ago and it took me about 4-5 hours to install.
Thanx for input!
kennyd
Advertiser
Are you asking about a "power beyond" connection that provides continuous flow, like for a backhoe or logspliter? Or are you asking for a set of valves (called SVC's to help you search) so as to operate a cylinder?
My fault looking to operate hydraulic cylinder.
If you have the loader, then you already have rear outlets, they're just not rear enough. I run extensions from my loader outlets to the back arms. Even if the loader is on, you can have the lift hoses connected while using the curl circuit for something else. A hydraulic post hole digger in my case. I run all my haying cylinders and snow plow lines from them. If you don't have a loader, consider getting at least the kit for adding the hydraulics.
spruce Deere
Veteran Member
- Joined
- Feb 1, 2009
- Messages
- 1,145
- Location
- Northmost Idaho
- Tractor
- John Deere 790 with loader LS xr3140h also with loader plus a cab
Does you 790 have a front end loader (fel)??
You can get a electric over hydraulic valve set up from WR long.... If they are still around. The set up is intended to operate a grapple on a grapple bucket, a bale squeeze things that need extra hydraulic functions on an fel. No reason one couldn't snake some hoses from one of these to the back of the tractor to operate an implement on the back...
You can get a electric over hydraulic valve set up from WR long.... If they are still around. The set up is intended to operate a grapple on a grapple bucket, a bale squeeze things that need extra hydraulic functions on an fel. No reason one couldn't snake some hoses from one of these to the back of the tractor to operate an implement on the back...