John Deere color coded rubber dust plug for hydraulic couplers
- Thread starter McKay
- Start date
- Views: 8631
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Hmm.. I know TSC sells some r/b/g/o hyd dust caps.. though not sure what size connectors you have.. etc.
soundguy
soundguy
kennyd
Advertiser
You can also get them from any JD dealer, the 1/4" size for my tractor are only about $3.00 a peice.
Does anyone know if I need the 1/2" ones for my 4720? I know on the mail end that the fitting is about 13/16". However my hoses appear to be about 1/2"
I found these:
John Deere Color Coded Rubber Dust Cap for Hydraulic Tips - SW211-015v
Does anyone know if they are the correct ones?
Thanks
I found these:
John Deere Color Coded Rubber Dust Cap for Hydraulic Tips - SW211-015v
Does anyone know if they are the correct ones?
Thanks
jdbower
Platinum Member
My mid SCVs on my 2520 are 1/4" and my Power Beyond is 1/2". The male end of my mid SCVs (Pioneer) is a little more than 1/2" and my Power Beyond (Parker) is actually about 3/4" - sounds like yours are 1/2" hoses/connectors.
