John Deere selective control valve question

   / John Deere selective control valve question #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I'm trying to figure out what can be wrong with my SCV on my 850. I put a model 75 loader on my tractor, I am having problems with the roll function of the bucket. The two levers which control lift and roll feel differnt from each other. I can lift and lower fine. I can roll back fine. I cannot dump. The control valve doesnt feel right. I removed the valve from the machine , and took that plunger out of the valve housing. Everything looks O.K from what I can see. It looks like the plunger will pull out, but won't go in enough to operate the cylinder. A replacement valve from JD cost 875.00. Can these be rebuilt easily? I priced all the parts for that plunger, including a spring and some bushings ect. All for around 20.00. Would I be wasteing my time with this? Should I look for some other culprit? Thanks Steve
 
   / John Deere selective control valve question
  • Thread Starter
#2  
I forgot to mention that the roll lever does not move as far as the lift lever. It pulls back, but will not push forward.
 

Tractor & Equipment Auctions

2014 Ford F550 4x4 Bucket Truck with Versalift SST40 - 45FT Working Height (A51039)
2014 Ford F550 4x4...
2014 VOLVO VN SERIES DAY CAB (A50854)
2014 VOLVO VN...
2016 Ford Fusion Sedan (A50324)
2016 Ford Fusion...
Neckover GL24-2-7K Gooseneck Trailer  24ft Deck, Dual 7K Axles, 14K GVWR (A51039)
Neckover GL24-2-7K...
377811 (A48836)
377811 (A48836)
2012 International Semi Truck (A50323)
2012 International...
 
Top