John Deere selective control valve question

   / John Deere selective control valve question #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I'm trying to figure out what can be wrong with my SCV on my 850. I put a model 75 loader on my tractor, I am having problems with the roll function of the bucket. The two levers which control lift and roll feel differnt from each other. I can lift and lower fine. I can roll back fine. I cannot dump. The control valve doesnt feel right. I removed the valve from the machine , and took that plunger out of the valve housing. Everything looks O.K from what I can see. It looks like the plunger will pull out, but won't go in enough to operate the cylinder. A replacement valve from JD cost 875.00. Can these be rebuilt easily? I priced all the parts for that plunger, including a spring and some bushings ect. All for around 20.00. Would I be wasteing my time with this? Should I look for some other culprit? Thanks Steve
 
   / John Deere selective control valve question
  • Thread Starter
#2  
I forgot to mention that the roll lever does not move as far as the lift lever. It pulls back, but will not push forward.
 

Tractor & Equipment Auctions

2016 Ford F150 Ext. Cab Pickup Truck (A50323)
2016 Ford F150...
2015 PETERBILT 367 HOT OIL (A50854)
2015 PETERBILT 367...
PAIR OF PIPE RACKS (A50854)
PAIR OF PIPE RACKS...
John Deere 700 Hydraulic Hay Rake - Durable Side Delivery Rake for Efficient Windrowing (A51039)
John Deere 700...
2018 PJ 40T/A GOOSENECK TRAILER (A50854)
2018 PJ 40T/A...
2018 FORD F-550XL SERVICE TRUCK (A51406)
2018 FORD F-550XL...
 
Top