Tony Harford
New member
- Joined
- Apr 15, 2021
- Messages
- 1
- Tractor
- John deere
Looking for an 18 tooth gear and a hub cap that is held on by 3 screws.
John deere van brunt model b drill
- Thread starter Tony Harford
- Start date
- Views: 433
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,597
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
Are the part numbers stamped, or cast into the pieces, or have a parts manual with the part numbers..?? If so, do a search on Google with those part numbers.
If no luck doing that, place a "want to buy" ad at TractorHouse. Third item down in the column at top left of page. https://www.tractorhouse.com/
I've found using the OEM part number is the best way to find parts of any kind.
If no luck doing that, place a "want to buy" ad at TractorHouse. Third item down in the column at top left of page. https://www.tractorhouse.com/
I've found using the OEM part number is the best way to find parts of any kind.
Tx Jim
New Member
Welcome to TBN
Believe it or not back 55 or so yrs ago I unloaded NEW JD model B drill components from a railroad box car & then got the "pleasure" of assembling the pieces into grain drills. I can't remember ever seeing in person a model B drill with wheels with bolt on cap. IIRC some sprockets have part # cast into sprockets
18 tooth sprocket I located is part number M10113 which is listed on JD's parts site @ $115. Hub cap is PN N160060 but not listed on JD Parts or Parts Depot search
Believe it or not back 55 or so yrs ago I unloaded NEW JD model B drill components from a railroad box car & then got the "pleasure" of assembling the pieces into grain drills. I can't remember ever seeing in person a model B drill with wheels with bolt on cap. IIRC some sprockets have part # cast into sprockets
18 tooth sprocket I located is part number M10113 which is listed on JD's parts site @ $115. Hub cap is PN N160060 but not listed on JD Parts or Parts Depot search