joystick repair

   / joystick repair #1  

Martyappleseed

New member
Joined
Mar 6, 2010
Messages
6
Location
Lyndon Michigan
Tractor
MF 1428v
I've got a MF 1464 loader with a NIMCO joystick. I need to replace the o-rings on the lift spool to fix a leak but I can't figure out how to remove them. I can get the control lever off and the plate underneath but then I'm stuck.
Anybody got a guess as to what I need to do?
 
   / joystick repair #2  
I've got a MF 1464 loader with a NIMCO joystick. I need to replace the o-rings on the lift spool to fix a leak but I can't figure out how to remove them. I can get the control lever off and the plate underneath but then I'm stuck.
Anybody got a guess as to what I need to do?

Nimco is a tough one to get parts for too....you probably will end up to "match up" these o-rings.....anyway.....try to find your valve among these downloads....There might be some cut outs that will show some details...also try to post some detailed pictures from both the spool ends....
 
   / joystick repair
  • Thread Starter
#3  
Found my valve from the list. Great source of information. Thanls!
 

Tractor & Equipment Auctions

2015 UTILITY VS2RS 53FT REEFER TRAILER (A54607)
2015 UTILITY VS2RS...
2008 DOOSAN G25 GENERATOR (A52472)
2008 DOOSAN G25...
2015 CAT D5K2 LGP (A47477)
2015 CAT D5K2 LGP...
2005 BIG TEX 18 TANDEM AXLE TRASH TRAILER (A53843)
2005 BIG TEX 18...
2003 Pierce Tilt Cab Foam Pumper Fire Truck (A51692)
2003 Pierce Tilt...
9202 (A50322)
9202 (A50322)
 
Top