Just another junk chainsaw

[xyz123]

Mad dog coarse like my old save edge ones.

Use many different handles depending on which it is. Lot of wooden and plastic ones.

 

[xyz123]

Seriously if your wanting a light limber that is so nimble. Rear handle echo 2511PN with nano set up 325 043.
Full of mix and bar oil. With 12” b+c in the 7lb range.
PHO dry 5lbs 12oz
Put a Egan pipe on it for 28% gains shown on Joes dyno.

There is guys porting them and using stock mufflers modded not even seeing those numbers.

I do have one botch. Their caps suk to use. Will be upgrading those.
They want you to use the starter handle to remove.

 

[JeepHead]

Seriously if your wanting a light limber that is so nimble. Rear handle echo 2511PN with nano set up 325 043.
Full of mix and bar oil. With 12” b+c in the 7lb range.
PHO dry 5lbs 12oz
Put a Egan pipe on it for 28% gains shown on Joes dyno.

There is guys porting them and using stock mufflers modded not even seeing those numbers.

I do have one botch. Their caps suk to use. Will be upgrading those.
They want you to use the starter handle to remove.

View attachment 3269683View attachment 3269684

I will second this for sure. The 2511 is so tiny it doesn't even feel real but it is an absolute monster for its size and so much fun to use. I put the Egan pipe on mine within a week of buying the saw new. This is one saw that ALWAYS goes out with me when I am cutting.

 

[xyz123]

I will second this for sure. The 2511 is so tiny it doesn't even feel real but it is an absolute monster for its size and so much fun to use. I put the Egan pipe on mine within a week of buying the saw new. This is one saw that ALWAYS goes out with me when I am cutting.

I still cant believe it is only 25cc.

I never ran the oem one stock to even see how bad that muffler was holding it back.

Mine all will be getting new caps though. I hate their 2 prong caps. Wanting us to use starter handle.

 

[JeepHead]

I still cant believe it is only 25cc.

I never ran the oem one stock to even see how bad that muffler was holding it back.

Mine all will be getting new caps though. I hate their 2 prong caps. Wanting us to use starter handle.

View attachment 3269697

Yeah you would never think it's only 25cc running it!! I don't have an issue with the caps, rarely do I need to use the starter handle to open them.

 

[xyz123]

Yeah you would never think it's only 25cc running it!! I don't have an issue with the caps, rarely do I need to use the starter handle to open them.

I wont use the starter handle. I stick scrench in to undo.

Friend has a 361 rear handle echo he said he wont even touch since buying the 2511 rear handle.

 

[xyz123]

Here is what will be on it and the clone fuel cap soon.
I never check to see if the smaller oiler cap on clone was different threads or not.

But I ordered 4.

 

[xyz123]

Just got a confirm that all 4 shipped yesterday.

They are like these but made for smaller huskys.

372 OE I had and sold with only 2 tanks through it. Can still buy them new from overseas dealer in my group.

 

[xyz123]

Last 6 OEM poulan 475 415 pto side crank seals I know of in US. In hand now.

John got the last ones from overseas last year.
I had sold out of my last 3 like 2 years ago.

2 are spoken for already.

They will be on the shelf for folks when needed for saws you keep oem.

 

[5030]

Pretty sure there are more out there in fantasyland.

I see you have 62,000 subscribers. Amazing. I didn't realize there were that many ancient chainsaws in use out there.

Must be a lucrative side business for you.