Kabota B2910 belly mowers

[Fredrick W. D.]

Will model number RCK6030M MOWER DECK FIT MY KABOTA B2910 TRACTOR

 

[CH4Ohio]

I have a B2910 with the 72" belly mower. I would NOT want a 60" mower on this tractor. It simply wouldn't extend out past the tires enough to be effective and allow you to trim and turn up against things. I can't directly answer your question, but I've got lots of experience with this tractor/mower combination and it's GREAT with the 72" mower.

Where are you located? Are you interested in a 72" mower? Do you already have the mounts on the tractor?

 

[Fredrick W. D.]

I have a B2910 with the 72" belly mower. I would NOT want a 60" mower on this tractor. It simply wouldn't extend out past the tires enough to be effective and allow you to trim and turn up against things. I can't directly answer your question, but I've got lots of experience with this tractor/mower combination and it's GREAT with the 72" mower.

Where are you located? Are you interested in a 72" mower? Do you already have the mounts on the tractor?

Thank you for replying to my post. I'm sorry for the late response for I'm not good with this digital world stuff lol. I appreciate the advice about not going with the 60" deck, and your experience with turning and getting close to trim up closer to things. I'm very interested in a 72" and I would need the front mount I believe that goes to the front of the deck to the front of the tractor. I've got a frontend loader on it and it's plumbed for a backhoe and I would believe other things. I love in a little town called Wayland NY 14572. I'm a hour south of Rochester NY. Any help would be appreciated greatly. I'll do my best to check in for any replies, I just happened to see you replied by accident don't know how. I know I sound stupid but just being honest about this digital stuff. Thank you for your help and time. Fred.

 

[CH4Ohio]

I was just wondering if you needed only the deck or if you also needed the front “clamp” that grabs the long u-shape on the front of the deck. Also do you have the arms hanging under the seat/foot pedal area where the deck attaches on each side? These arms have a linkage that goes back to a bracket that rests on one of the three-point arms. When you raise the three point lift it raises the mower deck.

Reason for asking — It’s not unusual to find decks for sale, but they rarely have all this mounting hardware. It’s usually left on the tractor. I’m just trying to help determine what you might need besides the deck itself.