Grading King Kutter 5' Box Blade and BX2200
- Thread starter pemad
- Start date
- Views: 1852
-
- Tags
- kubota bx2200
Turfman
Gold Member
Re: King Kutter 5\' Box Blade and BX2200
I have a 60 inch on my B2710. It handles it fine, but occasionally I'll lose traction with a full box. I would not want a wider blade on my tractor and it is (by compact standards) a much bigger tractor than the BX. I think you will be frustrated and disappointed with the results with a 60 inch on a BX. Any BX owners out there that have experience with a wide box blade?
Turfman
I have a 60 inch on my B2710. It handles it fine, but occasionally I'll lose traction with a full box. I would not want a wider blade on my tractor and it is (by compact standards) a much bigger tractor than the BX. I think you will be frustrated and disappointed with the results with a 60 inch on a BX. Any BX owners out there that have experience with a wide box blade?
Turfman
JohnMiller3
Elite Member
- Joined
- Jan 15, 2001
- Messages
- 2,517
- Location
- Capital District, Upstate New York
- Tractor
- Satoh S650G, MF135, MF165, JD5205
Re: King Kutter 5\' Box Blade and BX2200
<font color=blue>...The Kubota site shows a 4' in the implements list...</font color=blue>
Why... wouldn't you believe Kubota... the mfr.?
I think you'd be amazed at the strength of "mother nature" if you even used a 4' unit...
You have to realize the limitations of your sub-compact tractor and the original design intent... after enough times of undue stress... something has to give...
Mother nature and the laws of physics normally always wins... /w3tcompact/icons/smile.gif
<font color=blue>...The Kubota site shows a 4' in the implements list...</font color=blue>
Why... wouldn't you believe Kubota... the mfr.?
I think you'd be amazed at the strength of "mother nature" if you even used a 4' unit...
You have to realize the limitations of your sub-compact tractor and the original design intent... after enough times of undue stress... something has to give...
Mother nature and the laws of physics normally always wins... /w3tcompact/icons/smile.gif
ddl
Gold Member
Re: King Kutter 5\' Box Blade and BX2200
The reason I was asking is because I can get the 5' box blade for 299.00 and it is in stock. I hate waiting for special orders! From the sounds of everyones reply the 5' is too big for this tractor. I guess I will look into ordering the 4' box blade. Thanks for everyone feedback.
The reason I was asking is because I can get the 5' box blade for 299.00 and it is in stock. I hate waiting for special orders! From the sounds of everyones reply the 5' is too big for this tractor. I guess I will look into ordering the 4' box blade. Thanks for everyone feedback.
Wood_Butcher_Dav
Gold Member
Re: King Kutter 5\' Box Blade and BX2200
I have a BX2200 with a 4' land pride box blade which I think is a good match. I recall reading somewhere that Kubota is recommending a 42" box scraper. A 5' might work for some light duty grading but I'm sure you will loose traction before the box can fill up.
I have a BX2200 with a 4' land pride box blade which I think is a good match. I recall reading somewhere that Kubota is recommending a 42" box scraper. A 5' might work for some light duty grading but I'm sure you will loose traction before the box can fill up.
cchoate
Gold Member
Green_in_MI
Silver Member
Re: King Kutter 5\' Box Blade and BX2200
There is now way that your BX is going to drag that 5ft box blade around. I think you will get much much better results with 42in to 48 in boxblade.
There is now way that your BX is going to drag that 5ft box blade around. I think you will get much much better results with 42in to 48 in boxblade.
RET
Silver Member
- Joined
- Dec 28, 2001
- Messages
- 231
- Location
- Louisiana (near Baton Rouge)
- Tractor
- Kubota BX2200, JD LX277, Cub Lo-Boy
Re: King Kutter 5\' Box Blade and BX2200
I have a 48" box blade for my BX. The BX runs out of umphhh before the box gets full. Definitely do not get more than a 48" model. The BX would not be able to do much of anything with a 5' model.
I have a 48" box blade for my BX. The BX runs out of umphhh before the box gets full. Definitely do not get more than a 48" model. The BX would not be able to do much of anything with a 5' model.
