bodin1968
Bronze Member
need opinions. my tractor has a 56 hp PTO, looking at buying a 6 ft. KK cutter, should i get the 40 or 60hp gearbox?? thanks in advance
Rotary Cutter King Kutter Size GEARBOX
- Thread starter bodin1968
- Start date
- Views: 2525
sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 6,616
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
I know your going to think I am crazy, but can you get a 75?
When you put 56 horsepower into motion, and then hit something solid, it pays for it to be a little over-built!
David from jax
When you put 56 horsepower into motion, and then hit something solid, it pays for it to be a little over-built!
David from jax
OP
bodin1968
Bronze Member
60hp is highest they have..
LD1
Epic Contributor
You certainly dont want a gearbox rated for less HP than your tractor has
OP
bodin1968
Bronze Member
no doubt, thanks for the replies.. believe i'm gonna go with the BH16. like the specs a little better
Fallon
Super Member
My opinion is to big or go home. The gearbox needs to be bigger than the HP of your current or possibly future machine for sure. Spending a few extra bucks for a beefier part is good insurance in my book.
If you are putting more HP into a gearbox than it's rated for that's just asking for it to blow up on you. Warranty's won't cover abuse outside of operating specs.
If you are putting more HP into a gearbox than it's rated for that's just asking for it to blow up on you. Warranty's won't cover abuse outside of operating specs.
OP
bodin1968
Bronze Member
good advice... i have enough tractor pto power to go bh26 or brown 416 etc... not that much more in price.
